Adapter cards
Ref. #QLE8242-SR-CK
 
Network type:
Ethernet
 
Host interface type:
FCoE
 
Data transfer rate:
10 Gbit/s
 
Connector type:
LC
 
Server expansion slot:
PCI Express 2.0
 
Port number:
Dual
 
Visa and Mastercard accepted.
Express delivery possible
Datasheet
774.4 Kb, PDF File
Similar products
Emulex 10Gb/s OneConnect Universal CNA, dual channel FCoE, Short Reach Optical, PCI Express 2.0 x8
 
Emulex 10Gb/s OneConnect Universal CNA, dual channel FCoE, Direct attach copper, PCI Express 2.0 x8
 
Emulex OneConnect™ OCe11102-FM dual-port 10Gb/s Fibre Channel over Ethernet (FCoE) Converged Network Adapters (CNAs).
 
More Adapter cards More QLogic products
Related products
XFP 1310nm DFB, PIN, 10GBASE-LR/LW, 1200-SM-LL-L, 10.5 Gb/s multirate transceiver, single mode, XFP footprint, 3.3V, LC connector, -5/75°C operation, 10km.
Transceiver on stock from 345 USD.
 
Finisar SFP+ 1310nm DFB, PIN, 10GBASE-LR, 10.5 Gb/s multirate transceiver, limiting interface, RoHS/lead free, single mode, SFP+ footprint, LC connector, 0/70°C operation, 10km
Transceiver on stock from 225 USD.
 
XFP 850nm VCSEL, PIN, 10GBASE-SR/SW, 1200-Mx-SN-I, 10.5 Gb/s multirate transceiver, multimode, XFP footprint, 3.3V, LC connector, 0/70°C operation, 82m/300m.
Transceiver on stock from 198 USD.
 
More related products

QLogic QLE8242-SR

The 8200 Series Converged Network Adapters come in single- and dual-port models with support for SFP+ direct attach copper cables and SR (short reach) optical transceivers.

Features

  • PCI Express Gen2 ×8
  • Industry-leading 10Gbps networking performance
  • Full hardware offload for FCoE and iSCSI protocol processing
  • Support for three concurrent protocols: TCP/IP, FCoE, and iSCSI
  • VLAN, teaming, jumbo frame, and stateless offload support
  • SR-IOV for faster networking performance in virtualized environments
  • QLogic’s NIC Partitioning (NPAR) that works with any 10Gb Ethernet switch
  • Managed by QConvergeConsole and native OS-based management tools
  • Bullet-proof FCoE and iSCSI drivers that are common across all QLogic adapters
  • Compatible with existing Fibre Channel and iSCSI storage
  • PXE, UEFI, and iBFT boot support
  • Low-profile PCIe Express form factor