Adapter cards
Silicom PEG2i6
Network type:
Ethernet
 
Host interface type:
Ethernet
 
Data transfer rate:
1 Gbit/s
 
Connector type:
RJ 45
 
Server expansion slot:
PCI Express
 
Port number:
Dual
 
Add to cart pc.
Quick Quote Request pc.
Visa and Mastercard accepted.
Express delivery possible
Datasheet
49.7 Kb, PDF File
Similar products
Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Intel® based.
 
Single Port Fiber (LX) Gigabit Ethernet PCI Express Server Adapter Intel® based.
 
Dual Port Copper Gigabit Ethernet PCI Express Server Adapter Broadcom® BCM 5715C based.
 
More Adapter cards More Silicom products
Related products
Dot Hill 1 Gbit/s iSCSI SAN 24-bay 2.5-inch drive storage array, 2 x 1 Gbit/s iSCSI ports per controller, up to 96 drives supported (4 chassis of 2.5-inch drives in total).
 
Dot Hill 1 Gbit/s iSCSI SAN 12-bay 3.5-inch drive storage array, 2 x 1 Gbit/s iSCSI ports per controller, up to 96 drives supported (8 chassis of 3.5-inch drives in total).
 
Dot Hill 1 Gbit/s iSCSI SAN 24-bay 2.5-inch drive storage array, 4 x 1 Gbit/s iSCSI ports per controller, up to 144 drives supported (6 chassis of 2.5-inch drives in total).
 
More related products

Silicom PEG2i6

Key Features

Performance Features:

  • 16 Transmit and Receive queues per port
  • Up to 16 queues of Receive Side Scaling (RSS) minimize CPU utilization across multiple processor systems
  • Support for 8 pools of virtual machine Device Queues ( VMDq) per port
  • Support Direct Cache Access ( DCA)
  • Support Intel I/O AT 2.0
  • TSO interleaving for reduced latency
  • UDP TSO
  • Minimized device I/O interrupts using MSI and MSI-X
  • Offload of TCP / IP / UDP checksum calculation and TCP segmentation
  • SCTP receive and transmit checksum offload
  • Packet interrupt coalescing timers (packet timers) and absolute- delay interrupt timers for both transmit and receive operation

 

Copper Gigabit Ethernet 1000Base-T:

  • Independently copper Gigabit Ethernet channels support Single Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T)
  • Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation
  • Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex
  • RJ-45 female connectors

 

Common Key features:

  • Host Interface standard support PCI-Express Base Specification Revision 1.1.
  • High performance, reliability, and low power use in Intel 82576 Dual integrated MAC + PHY and SERDES chip Controllers
  • Ultra deep, packet buffer per channel lowers CPU utilization
  • Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation
  • Server class reliability, availability and performance features:
    • Link Aggregation and Load Balancing.
  • Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
    • Switch and NIC Independent 
    • Failover
  • Priority queuing – 802.1p layer 2 priority encoding
  • Virtual LANs –802.1q VLAN tagging
  • Jumbo Frame (9.5KB)
  • 802.x flow control
  • PCI-SIG SR IOV (8 VF)
  • Multicast/ broadcast Packet replication
  • Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
  • Supports Vital Product Data (VPD)
  • Integrated LinkSec security engines
  • Supports IEEE 1588
  • LEDs indicators for link/Activity/Speed status