Default welcome msg!

Metamako METAAPP 32

More Views

Metamako METAAPP 32
Metamako MetaApp 32, 32-port hybrid layer 1 / layer 2 applications platform with 4ns L1 latency

In stock



Applications Platform
· 5 ns latency with virtually no jitter
· 32 ports connected to layer 1+ switch
· External PCI Express connectivity
· Four built-in 10GbE/40GbE interfaces
· Two front-panel 2.5" SATA drive bays suitable for SSD
· VGA output
· Extensive time syncronisation infrastructure
· Application development via MOS
· Compatible with any MetaMux applications
· Sample applications and development kit
· Choose, MOS or CentOS 7 operating systems

Layer 1
· 5 ns latency with virtually no jitter
· Non-blocking matrix switching fabric
· SFP/SFP+ ports from 100M-11.3Gbps
· Bit-for-bit forwarding for any protocol
· Unlimited port-to-port mirroring with regeneration
· Multiple independent links through the device are supported at different data-rates
· High performance signal recovery, regeneration and conditioning (EDC on input, CDR on input and output)

· Multiplexing (32:1 or 2 x 16:1) in 99 ns for 10GbE (1GbE to follow)
· Packet statistics without affecting the 5 ns layer 1 performance
· Precise packet timestamping
· Packet capture

Cable Compatibility
· Compatible with SR, LR, ZR and LRM SFP/SFP+ modules and
direct attach cables
· Drive any MSA compliant SFP/SFP+ module
· Works with long list of third-party SFP/SFP+ modules (see FAQ)
· 100M,1GbE, 10GbE and many others

Redundancy & Data Center
· 1 rack unit (1RU)
· Dual redundant, hot-swappable power supplies (DS460S)
· Dual redundant, hot-swappable fans
· Fan and power supply replacement kits are available
· Front-to-back or back-to-front air flow

· Packet statistics captured on every port (valid packets, invalid packets, link state)
· Eye diagram for monitoring and troubleshooting signal quality
· Front panel LEDs for port activity and status
· Ports can be “sniffed” via the management system
· Precise timestamping without additional latency (via port tapping - see use cases for more details) or on egress port at approximately 300ns for non-latency critical paths
· Fully managed SFP+ interface diagnostics including light levels, temperature and voltages

Management Platform
· Quad-core, hyperthreaded x86-64 CPU
· 4GB RAM, on-board SSD
· Industry standard command line interface (serial/SSH/telnet)
· Web-based GUI
· Linux based (shells, scripting, Python, RPMs etc.)
· Binary compatibility with other x86-64 based Linux systems
· Firmware restore and update via USB, serial and network
· A future software release will provide a switch subsystem API and allow user applications to run in a VM

Management Protocols
· HTTP/S, SSH, telnet
· Serial console
· SNMP v1, v2, v3
· Network boot via TFTP*
· Local and remote syslog
· RADIUS and TACAS+ authentication*
*Available in a future software release

Operating Environment
· Temperature: 0°C to 40°C
· Humidity: 10% to 85%, non-condensing
· Maximum altitude: 3000m (9800ft)

Physical and Electrical
· Dimensions (h x w x d): 4.3 x 44.8 x 37.9cm (1.7 x 17.6 x 14.9in)
· Weight: ~8kg (17.6lbs), depending on configuration
· Maximum power: 290W
· AC voltage range: 100-240V, AC frequency: 50/60Hz
· DC voltage range: 40-72V
Additional Information

Additional Information

Manufacturer Metamako
Name Metamako METAAPP 32
Country Australia
Network Type Ethernet
Form Factor SFP+
Number of Ports 32
Connector Type SFP+ cage
Temperatur Range 0 to 40 °C
Power Supply dual
Chassis Height 1U
Call For Price Yes

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.